The carbide saw blade consists of a saw blade and a carbide sawtooth. Because the blade adjusts the rotation, it transmits both the cutting force and the stability of the work.

Generally, the flat ladder teeth (flat teeth, trapezoidal tooth combinations) are selected.The outer diameter of the saw blade is mostly 肖300-350mm depending on the type of circular saw machine.

4, repair the saw blade must not change its original angle, to avoid partial hot flashing of the cutter head, it is best to professionally repair the grinding5.

Basic data: 1 machine spindle speed, 2 machined workpiece thickness and material, 3 blade saw outer diameter size and aperture (shaft diameter)2.

Flat teeth: Flat teeth are mainly used for slotting and ordinary wood sawing. Usually, the number of teeth is large, with a 5 degree bevel angle, and the surface quality of the cut is good.

The lower machine can visually check whether the tooth tip of the saw blade has chipping and whether the steel plate is obviously deformed.(2) After the saw, the plate has the following burst1.